Light-duty mobile workover rigs
This kind of workover rigs are designed and manufactured in accordance with API Spec Q1、4F、7k、8C and technical standards of RP500，GB3826.1、GB3836.2 GB7258，SY5202 as well as“3C” compulsory
standard.
The whole unit structure is compact and adopts hydraulic + mechanical driving mode, with high comprehensive efficiency.
The workover rigs adopt II-class or self-made chassis with various to meet the user’s different requirements.
The mast is front-open type and with single-section or double-section structure, which can be raised and telescoped hydraulically or mechanically.
Safety and inspection measures are strengthened under the guidance of the design concept of “Humanism Above All” to meet the requirements of HSE
The main technical specification for light-duty (below 80T) mobile workover rigs
| Model | XJ35 | XJ60 | XJ70(XJ250) | XJ80 |
|---|---|---|---|---|
| Nominal service depth (2 7/8″OP) ft | 5200 | 8500 | 10000 | 12000 |
| Nominal workover depth (2 7/8″DP) ft | 3300 | 4900 | 6600 | 8200 |
| Max hook load (lbs) | 80000 | 130000 | 150000 | 180000 |
| Engine model | X6130 | F8L413F | T-3A929 or WD615.68 | MWM TBD234V6 |
| Engine power (hp) | 233 | 252 | 282 or 303 | 335 |
| Transmission mode) | Hydraulic +Mechanical | |||
Heavy-duty mobile workover rigs
This kind of workover rigs are designed and manufactured in accordance with API Spec Q1、4F、7k、8C and technical standards of RP500，GB3826.1、GB3836.2 GB7258，SY5202 as well as“3C”compulsary
standard.
The whole rig structure is compact, highly integrated, and requires a small space for installation.
The heavy-duty chassis are 8×6、10×8、12×8、14×8 constant- drive and self-propelled, equipped with hydraulic steering system and have a good capability of passage and cross country.
A good and reasonable assembly of CATERPILLAR engine and ALLISON transmission box can supply a high driving efficiency and increase safe performance.
Band brake or disc brake is applied for the main brake and the air disc brake/water brake or FDWS is used for auxiliary brake.
The compound box for rotary table has a function of forward-reverse speed shift gears, which can be suitable for DP’s rotary operations. The anti-torque releasing device can be used to
release the deformation energy of the DP safely.
The mast is front –open type, with double- section structure, which can be telescoped, raised and extended hydraulically.
The drill floor is twin-body telescopic type or with parallelogram structure, which is convenient for installation and transportation. The dimension and height of the drill floor can be
designed according to the user’s requirements.
Safety and inspection measures are strengthened under the guidance of the design concept of “Humanism Above All” to meet the requirements of HSE.
The main technical specification for heavy-duty (above 80T) mobile workover rigs
| Model | XJ90(XJ350) | XJ110(XJ450) | XJ135(XJ550) | XJ160(XJ650) | XJ180(XJ750) | XJ225(XJ850) |
|---|---|---|---|---|---|---|
| Nominal service depth(2 7/8″OP)ft | 13000 | 18000 | 23000 | 26000 | ---- | ---- |
| Nominal workover depth(2 7/8 “DP)ft | 10000 | 15000 | 19000 | 23000 | 26000 | ---- |
| Drilling depth(4 1/2″DP)ft | 3300 | 5000 | 6600 | 8200 | 10000 | 13000 |
| Max hook load (lbs) | 200000 | 250000 | 300000 | 350000 | 400000 | 500000 |
| Engine model | CAT3406 C-9ANAAC | CAT3408DITA C-15ATAAC | CAT3408DITA C-15ATAAC | CAT3412DITA C-16ATAAC | 2×CAT3408DITA 2×-15ATAAC | 2×CAT3408DITA 2×-15ATAAC |
| Engine power (Noxhp) | 361 or 350 | 475 | 531 or 526 | 650 or 660 | 2×475 | 2×531 or 2×526 |
| Model for hydraulic transmission box | S5610HR | S5610HR | S5610HR | S5610HR | 2×S5610HR | 2×S5610HR |
| Transmission mode | Hydraulic + Mechanical | Hydraulic + Mechanical | Hydraulic + Mechanical | Hydraulic + Mechanical | Hydraulic + Mechanical | Hydraulic + Mechanical |
| Mast height ft | 95 | 105 | 108 | 115 | 118/125 | 118/125 |
| Traveling system | 4×3 | 5×4 | 5×4 | 5×4/6×5 | 5×4/6×5 | 6×5 |
| Main wireline diameter (in) | 1 | 1 | 1 | 1 | 1/1/2004 | 1/1/2004 |
| Hook speed (ft/s) | 0.66~5.74 | 0.66~3.94 | 0.66~4.59 | 0.66~4.27 / 0.66~4.59 | 0.66~4.27 / 0.66~3.94 | 0.66~4.27 |
| Substructure model/ transmission way) | XD40/8×6 | XD50/10×8 | XD50/10×8 | XD60/12×8 | XD70/14×8 | XD70/14×8 |
| Approaching angle/leaving angle | 23°/16° | 26°/17° | 26°/17° | 23°/18° | 26°/18° | 26°/18° |
| Min. ground clearance (in) | 13 3/8 | 12 1/4 | 12 1/4 | 12 1/4 | 12 1/4 | 12 1/4 |
| Max gradeability | 30% | 26% | 26% | 26% | 26% | 26% |
| Min turning radiusft | 92 | 108 | 108 | 38 | 41 | 41 |
| Rotary table Model | ZP90 | ZP135 | ZP135 | ZP175 | ZP205 / P275 | ZP205 / ZP275 |
| Hook block Model | YG90 | YG110 | YG135 | YG160 | YG180 | YG225 |
| Swivel Model | SL110 | SL110 | SL135 | SL160 | SL225 | SL225 |
| Overall dimension ft | 55×9×13.5 | 61×9×14 | 62×9×14 | 67×9×15 | 74×10×15 | 74×10×15 |
| Weight for main unit (lbs) | 92600 | 110000 | 120000 | 143000 | 168000 | 172000 |
| Weight for accessories (lbs)(approximate) | 33000 | 44000 | 44000 | 44000 | 66000 | 66000 |
